Configure a subnet router
This topic is a quick guide for configuring subnet routers in a tailnet. For more detailed information, see Subnet routers.
To use a tailnet device as a subnet router, select your platform and complete the steps.
-
Download and install the Tailscale client.
-
In a PowerShell session, advertise subnet routes for the device. Replace the subnets in the example below with the subnets for your network.
tailscale up --advertise-routes=192.0.2.0/24,198.51.100.0/24 -
Go to the Machines page of the admin console and locate the device in the list. It should display the Subnets badge.
-
Select the
menu, then select Edit route settings. -
Check the IP range boxes that correspond to the subnet routes you want to advertise, then select Save.
For more information about subnet router configuration with Tailscale, see Subnet routers.